To: (Separate email addresses with commas)
From: (Your email address)
Message: (Optional)



6 Ways To Help ATC On Your Next IFR Flight

This story was made in partnership with Republic Airways. Check out the full series here. Ready to apply for a pilot slot? Submit your application here.

Here's how you can keep things running smoothly...

1) File ahead of time

AIM 5-1-8 recommends that you should file an IFR flight plan no less then 30 minutes prior to your estimated time of departure. This helps you avoid delays by making sure your flight plan is in the system when you call for your clearance.


2) Minimize unnecessary radio calls

Be concise, and avoid long calls. When you think about what you're going to say before you key the mic, you'll keep your calls clear and concise.

Live from the Flight Deck

3) Get ATIS Early

If you're in range, get ATIS information ahead of time. When center transfers you to approach control, you'll already have the current weather, and they won't have to spend time asking if you have it.

4) Think ahead

Look at the approaches for your destination airport before you leave the ground. If you know what available, and what the weather is doing, you'll be better prepared to brief and fly your approach.


5) Keep your speed up at busy airports

Keeping your speed up helps ATC with separation between GA aircraft and larger turboprop/jet aircraft.


6) Saying thank you goes a long way

After all, you and ATC are working together to make air travel safer for everyone.


Ready to start your airline career? Want to fly an E-170/175? Get started and apply to Republic Airways today.

Corey Komarec

Corey is an Embraer 175 First Officer for a regional airline. He graduated as an aviation major from the University of North Dakota, and he's been flying since he was 16. You can reach him at

Images Courtesy:

Recommended Stories

Latest Stories

    Load More
    Share on Facebook Share on Twitter Share via Email