To: (Separate email addresses with commas)
From: (Your email address)
Message: (Optional)
Send
Cancel

Thanks!

Close

How To Recover From A Balloon During Your Landing Flare

At some point, it happens to all of us. Here's what you can do to make a safe landing after a balloon.

Boldmethod

How A Balloon Happens

When you misjudge your sink rate during landing and think the airplane is descending too fast, you have a natural reaction to sharply increase pitch attitude. If you make this mistake (and we all have at some point), you'll not only stop your descent, you'll actually initiate a climb during your flare.

This is called ballooning. It's hazardous, because your height above the ground increases as your airplane approaches a stalled condition (increasing AOA and depleting speed). The severity of a balloon depends on your airspeed and how quickly pitch attitude is increased.

Boldmethod

How To Recover

In many cases, a slight balloon can be recovered by gently relaxing back pressure on the yoke/stick while still maintaining a nose-high pitch attitude, descending into a second flare, and touching down. You may have to use a slight amount of power to cushion the landing. This prevents the airplane from decelerating too rapidly and touching down hard.

Remember, though, that you need to close the throttle right after touchdown. There's another consideration too. When you apply power to recover from a balloon, you also create torque. You might need a little more right-rudder pressure to keep the airplane aligned with the centerline for touchdown.

If your balloon is excessive, you should execute a go-around immediately. Unfortunately, there are no specific criteria for this other than your judgment based on the landing experience you have. If you feel like your balloon is excessive, or that your airspeed is rapidly decaying, apply full power and perform a go-around before you enter a stalled condition.

Boldmethod

Ballooning During A Crosswind Landing

If you're flying a crosswind landing, you have to be cautious. During the recovery from a balloon, many pilots have a tendency to relax their crosswind input. Since you're now at a lower airspeed, crosswind affects your airplane more because your flight controls are less effective at slower speeds.

The upwind wing must be lowered even further to compensate for drift, and you need more right rudder to stay aligned with the centerline. It's crucial to maintain directional control with opposite rudder. If you start to drift, execute an immediate go-around.

Want A Visual?

If you have a large balloon and you don't recover properly, it can lead to a hard touchdown like this:

What's your strategy to deal with ballooning? Tell us in the comments below.

Take The Next Step...

Do you have a perfect takeoff and landing every time? Neither do we. That's why we built our Mastering Takeoffs and Landings online course.

You'll learn strategies, tactics and fundamental principles that you can use on your next flight, and just about any takeoff or landing scenario you could imagine. Even better, the course is full of tools you can come back to throughout your flying career.


Swayne Martin

Swayne is an editor at Boldmethod, certified flight instructor, and an Embraer 145 First Officer for a regional airline. He graduated as an aviation major from the University of North Dakota in 2018, holds a PIC Type Rating for Cessna Citation Jets (CE-525), and is a former pilot for Mokulele Airlines. He's the author of articles, quizzes and lists on Boldmethod every week. You can reach Swayne at swayne@boldmethod.com, and follow his flying adventures on his YouTube Channel.

Images Courtesy:

Recommended Stories

Latest Stories

    Load More
    Share on Facebook Share on Twitter Share via Email